Overview; Adjustment By Use Of Adjustment Program (Tbd) - Epson Stylus PHOTO RX640 Service Manual

EPSON Stylus PHOTO RX640/650

5.1 Overview

The adjustments of Stylus PHOTO RX640/650 are roughly classified to the following
types.
Table 5-1. Adjustment Types
Type When to Adjust
Printer mechanical
adjustments Once the carriage has
(Stylus PHOTO RX640/ been removed or
650 requires only PG replaced
adjustment)
Once relevant
Adjustments by use of
components have been
printer adjustment
reassembled or
program
replaced
Once the CR Shaft or
Scanner home position
Carriage has been
adjustment
removed
Firmware update As required
C H E C K
If the disassembly process includes the removal of any
P O I N T
components/parts specified, make the adjustments specified.
If it is impossible to back up the EEPROM data when replacing
the Main Board, replace all the maintenance parts with new
ones and clear the counter.
In addition, make
(p.75).
Make the mechanical adjustments before making adjustments
that use the adjustment program.
Adjustment
Description
During assembly of the printer,
adjust platen gap using
adjustment tools.
After the assembly of the
printer, make the adjustments
required depending on the
removed (replaced)
components.
After the assembly of the
Scanner Unit, adjust the home
position using the dedicated
program and tools.
Refer to the attached file for the
method and procedure.
5.1.3 Scanner Home Position Adjustment

5.1.1 Adjustment by Use of Adjustment Program (TBD)

Description:
For the adjustment by use of the adjustment program, the details are described in
the window and help of the program. Therefore, this manual does not describe the
details of the adjustment by use of the adjustment program.
OS:
Preparations for use of the program:
Refer
Copy the supplied folder containing the adjustment program onto the HDD of a
to
PC.
C H E C K
Connect the printer to the PC with the USB cable before running
p.73
P O I N T
the adjustment program.
p.72
p.75
–
Overview
Windows 98/Me/2000/XP
Revision B
Revision B
72