Epson Stylus PHOTO RX640 Service Manual page 26

EPSON Stylus PHOTO RX640/650
Causes
Scan to memory error Can not saving data, because memory card has been
(card removed) removed.
Card insertion Recognition of the memory card failed.
The waste ink counter is indicating that the life of
Life of waste ink pads is near
the waste ink pads has been nearly expired.
end.
This is displayed only at power on.
A non-supported medium is
Unformatted or non-supported medium is inserted.
inserted
Memory card Mode has been selected with no
No memory card is inserted.
memory card inserted.
Memory card print No image is contained in the memory card.
Backup error (no card) Backup source does not exist.
Backup error Backup was about to be started without an external
(no external connection) device connected.
This message is displayed when backup has been
Message of backup cancel
canceled.
Backup error Backup was about to be started with the Unit
(connected to PC) connected to a PC.
Backup error (insufficient Insufficient capacity of destination media for
external media capacity) backup.
This message is displayed when file clearness is
File clearness (Cancel)
canceled
File clearness
An error has occurred in file clearness.
(Error has occurred.)
File clearness Memory card has been removed during file
(Memory card has removed) clearness.
Troubleshooting
Table 3-2. Warning List (continued)
Details
The memory card or disk was removed. Operation canceled.
Cannot recognize the memory card or disk.
Service required. Parts inside your printer are near the end of their service
life.
See your manual for details.
Cannot recognize the memory card or disk. Do you want to format it?
No memory card or disk inserted.
A memory card was inserted.
No photos found.
No memory card in slot.
Backup canceled.
External device is not connected or media is not inserted.
Backup canceled.
Backup canceled.
Backup cannot be performed when connected to a PC.
Insufficient space on the backup device.
Backup cannot be performed.
Operation canceled.
An error occurred while clearing files.
Operation canceled.
The memory card or disk was removed. Operation canceled.
Troubleshooting When There is Error Display
Displayed Message (TBD)
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Back"
Guide Display "<OK>: Proceed, <Back>: Cancel"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Guide Display "<OK>: Finish"
Revision A
Recovery Procedure
Press the OK button
Press the OK button or wait for a
certain time (approx. 3 seconds).
Initialize the EEPROM or replace the
waste pads and related parts. Or press
"OK: Back"
OK: Format
Back: Not format
Press the OK button or wait for a
certain time (approx. 3 seconds).
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
Press the OK button
26