Led Status Indicator; Dimension Drawing; Installation & Operation; Notes On Installation - Siemens SIMATIC RTLS System Manual

Transponder
7.1 SIMATIC RTLS4030T
7.1.1.3

LED status indicator

The operating states of the transponder are indicated by the LEDs. The states can be off ,
on
LED (green)
7.1.1.4

Dimension drawing

Figure 7-1
7.1.2 Installation & Operation
7.1.2.1

Notes on installation

Before you install the devices, read this section carefully to ensure trouble-free installation and
operation.
The devices can only be used in conjunction with the RTLS localization system. Setup,
installation and use of the tools and clients of the RTLS localization system are described in the
corresponding manuals.
Mount the device so that it has a direct line-of-sight connection to the anchors/gateways (360°
panorama view). Any type of material can impact localization. Localization through metal is not
possible. Localization through radio reflections is possible in this case which results in an
inaccurate localization.
126
and flashing .
Meaning
Flashes green briefly when the device is ready for operation.
Flashes green permanently when the device is moved.
Dimension drawing SIMATIC RTLS4030T - All dimensions specified in millimeters
System Manual, 04/2019, C79000-G8976-C577-01