Siemens SIMATIC RTLS System Manual page 134

Transponder
7.2 SIMATIC RTLS4060T
Pin
4
5
6
7
8
Digital output
Both digital device outputs can switch resistive, capacitive and inductive loads. The current is
automatically limited to these functions.
The following must be observed for inductive loads (e.g. relays): Inductivities up to 32 H can be
switched off without freewheeling diode D
inductivities.
If a freewheeling diode D
Digital input
The device has 2 digital inputs. Each has a range from 0 to 24 V with an impedance of 4.7 kOhm.
134
Description
Digital input 2
Digital input 1
CAN L
CAN H
Not used
is used, an additional polarity protection diode D
V
Color of the cable core
Orange
Yellow
Green
Blue
Violet
. A freewheeling diode D
V
System Manual, 04/2019, C79000-G8976-C577-01
is required for higher
V
must be inserted.
P