Dimension Drawing; Installation & Operation; Notes On Installation - Siemens SIMATIC RTLS System Manual

7.2.1.4

Dimension drawing

Figure 7-2
7.2.2 Installation & Operation
7.2.2.1

Notes on installation

Before you install the devices, read this section carefully to ensure trouble-free installation and
operation.
The devices can only be used in conjunction with the RTLS localization system. Setup,
installation and use of the tools and clients of the RTLS localization system are described in the
corresponding manuals.
The device is intended for installation in a vehicle. Installation is to be performed by qualified
and trained personnel according to the operating instructions. In addition, installation must take
place in accordance with the respective instructions for the installation of electrical systems and
utilities.
Note the specifications in the section "Technical specifications" during installation and
operation.
Make sure that the ambient temperature does not exceed 50 °C and that the device is not
installed at a location where it is exposed to direct sunlight.
System Manual, 04/2019, C79000-G8976-C577-01
Dimension drawing SIMATIC RTLS4060T - All dimensions specified in millimeters
Transponder
7.2 SIMATIC RTLS4060T
135