Replacing The Batteries; Cleaning And Maintenance; Technical Specifications - Siemens SIMATIC RTLS System Manual

Transponder
7.4 SIMATIC RTLS4084T
7.4.2.2

Replacing the batteries

Proceed as follows to replace the batteries:
1. Loosen the two screws on the left-hand side with a cross-tip screwdriver.
2. Insert the batteries in the device according to the polarity direction given on the lid.
3. Then close the housing again, making sure that the sealing ring on the screw is positioned
correctly. Recommended tightening torque for both screws is 7.2 +/- 0.2 Ncm.
Note
The batteries of the device should only be changed in dry environments.
7.4.2.3

Cleaning and maintenance

The enclosure may only be opened to change batteries.
The device may only be repaired by an authorized maintenance company or opened for other
types of work.
Improper opening or repairing of the device may result in risks for the user. Opening the device
without permission renders the warranty of the Siemens AG null and void.
Do not clean the enclosure with liquids or abrasive, caustic or flammable cleaning products.
7.4.3

Technical specifications

Table 7-10 Technical specifications of the transponder RTLS4084T
Product name
PULSE radio frequencies (localization)
Wireless method
Transmission speed
Operating frequency rated value
Transmit power
Range
Accuracy of the localization
Antennas
PHASE radio frequencies (communication and optional local‐
ization)
Wireless method
152
SIMATIC RTLS4084T
IEEE 802.15.4-2011 UWB
6.8 Mbps
3100 MHz ... 4800 MHz
6000 MHz ... 7000 MHz
0.037 mW (-41.3 dBm/MHz)
Max. 30 m
0.2 m
UWB antenna integrated
IEE 802.15.4
System Manual, 04/2019, C79000-G8976-C577-01
6GT2700-7DC03