Configuration; Tig Welding - Panasonic YC-300BZ3YHD Operating Instructions Manual

4. Configuration

4.1 TIG welding


Customers are required to prepare the items other than
marked as "This product" or "Accessory".

The items marked with "*" are available as peripheral
equipment (optional items), with separate sales. (See
section "Peripheral equipment").
When using the special water-cooling torch
16
13
5
14
9
10
8
5
No. Item
1 Welding power source
2 Argon gas regulator
3 Argon gas
4 Gas hose
5 Grounding wire
*4
6
Fingertip joint
7a
Water-cooling TIG welding torch
7b
Air-cooling TIG welding torch
8 Base metal
9 Remote controller
*2
10
Base metal cable
11 Input power cable
12 Distribution box
Note
About "Base metal cable"
To prevent overheat of the cable and provide with proper
welding, prepare a cable which is a welding cable or
cabtire cable (excluding the class-1 cabtire cable and vinyl
cabtire cable) of 38mm
About "Water-cooling welding torch"
In case of using water cooled welding torch, make sure
to supply cooling water while using the torch.Failure to
follow the instruction can damage the torch.
OMCTT5621E18
15
12 2
1
11
5
6
7a
Remarks
This product
Accessory
Accessory
*1 *4
*1 *4
2
or more

For arc spot welding, configurations are the same as the
followings.
In case of arc spot welding, it is necessary to prepare
"Arc spot nozzle" separately.
When using the special air-cooling torch
3
6
9
10
4
5
No.
13 Supply water hose
* 14 Return water hose
15 Flow-rate switch cable
16
Cooling water unit and cooling water
17
Gas hose
*1
In the case of arc spot welding, use the special arc spot
nozzle.
*
*2
Connect it to the output cable of the base metal if neces-
*
sary.
*3
* Do not put the cooling water system on top of the welding
power unit.
*4
Welding torch and fingertip joint
Make sure to use the Panasonic genuine products only.
Or the connection part may be burnt due to poor contact.
*5
The gas hose lead-out point of the air-cooling TIG welding
torch is different from that of the water-cooling TIG welding
torch.
Configuration
1
11
5
7b
8
Item
*5
12 2 3
4
17
Remarks
*3
*
11