Comparison Of I/O Module Specifications; Comparison Of Input Module Specifications - Mitsubishi Electric MELSEC Q Series Handbook

3
REPLACEMENT OF I/O MODULE

3.2 Comparison of I/O Module Specifications

3.2.1 Comparison of input module specifications

(1) Specifications comparison between A1SX10 and QX10
Specifications
Number of input points
Isolation method
Rated input voltage
Input voltage distortion
Rated input current
Inrush current
Operating voltage range
Maximum number of
simultaneous input points
On voltage/on current
Off voltage/off current
Input resistance
Off  on
Response
time
On  off
Common terminal
arrangement
Operation indication
External connection
system
Applicable wire size
Applicable solderless
terminal
Current consumption
External dimensions
Weight
*1 Check the specifications of the sensor or switches to be connected to the QX10.
*2 The following shows the derating chart.
A1SX10
16 points
Photocoupler
100-120VAC 50/60Hz
Within 5%
Approx. 6mA
(100VAC, 60Hz)
Maximum 200mA Within 1ms
(132VAC)
85 to 132VAC
(50/60Hz±5%)
*2
Refer to the derating chart.
80VAC or more/5mA or more
30VAC or less/1.4mA or less
Approx. 18k (60Hz)
Approx. 21k (50Hz)
20ms or less
(100VAC, 60Hz)
35ms or less
(100VAC, 60Hz)
16 points/common
(common terminal: TB9, TB18)
On indication (LED)
20-point terminal block connector
(M3.57 screws)
2
0.75 to 1.25mm
R1.25-3.5, R2-3.5,
RAV1.25-3.5, RAV2-3.5
0.05A (typ. all points on)
130(H)34.5(W)93.6(D)mm
0.21kg
(A1SX10)
132VAC
: Compatible,
QX10
16 points
Photocoupler
100-120VAC 50/60Hz
Within 5%
Approx. 8mA (100VAC, 60Hz)
Approx. 7mA (100VAC, 50Hz)
Maximum 200mA Within 1ms
(132VAC)
85 to 132VAC
(50/60Hz±3Hz)
*2
Refer to the derating chart.
80VAC or more/5mA or more
(50Hz, 60Hz)
30VAC or less/1.7mA or less (50Hz,
60Hz)
Approx. 12k (60Hz)
Approx. 15k (50Hz)
15ms or less
(100VAC 50Hz, 60Hz)
20ms or less
(100VAC 50Hz, 60Hz)
16 points/common
(common terminal: TB17)
On indication (LED)
18-point terminal block
(M36 screws)
2
Core: 0.3 to 0.75mm
(outside diameter: 2.8mm or less)
R1.25-3
(Sleeved solderless terminal cannot
be used.)
0.05A (typ. all points on)
98(H)27.4(W)90(D)mm
0.17kg
100
90
80
On
ratio 70
60
50
40
0 10
Ambient temperature
: Partially changed, : Incompatible
Compat-
Precautions for replacement
ibility







Use it within the range shown in
the derating chart.

*1
The off current differs.
The input resistance is

*1
reduced.






Wiring change is required.


Wiring space is narrower.
(QX10)
120VAC
132VAC
20 30 40 50 55
3
- 16