I/O Module Specifications Comparison; Input Module Specifications Comparison - Mitsubishi Electric MELSEC-A0J2H Series Handbook

3
I/O MODULES REPLACEMENT

3.2 I/O Module Specifications Comparison

3.2.1 Input module specifications comparison

(1) Specifications comparison between A0J2-E32A and QX10
Specifications
Number of input points
Insulation method
Rated input voltage
Input voltage distortion
Rated input current
Inrush current
Operating voltage range
Maximum number of
simultaneous input
points
ON voltage/ON current
OFF voltage/OFF current
Input impedance
OFFON
Response
time
ONOFF
Common terminal
arrangement
Operation indication
External connection
method
Applicable wire size
Applicable solderless
terminal
Current consumption
External dimensions
Weight
*1 Check the specifications of the sensor or switches to be connected to the QX10.
*2 The following shows the derating chart.
A0J2-E32A
32 points
Photocoupler
100-120VAC, 50/60Hz
–
10mA Approx. 8mA (100VAC, 60Hz)
(100VAC, 60Hz) Approx. 7mA (100VAC, 50Hz)
Max. 300mA, within 0.3ms
(with 132VAC)
85 to 132VAC
(50/60Hz±5%)
100% (32 points)
simultaneously ON
80VAC or more/5mA or more
80VAC or more/6mA or more
40VAC or less/4mA or less
Approx. 10k (60Hz),
Approx. 12k (50Hz)
15ms or less (6ms TYP.)
35ms or less (16ms TYP.)
16 points/common
(Common terminal: TB17, TB34)
Available (Turning ON the input
turns LED ON)
36-point terminal block
connector
(M3 × 6 screws)
2
0.75 to 2mm
1.25-3, 1.25-YS3A,
2-S3, 2-YS3A,
(Sleeved solderless terminals
V1.25-3, V1.25-YS3A,
V2-S3, V2-YS3A
0.105A (TYP. All points are ON.) 0.05A (TYP. All points are ON.)
250(H) × 132(W) × 41(D) mm 98(H) × 27.4(W) × 90(D) mm
0.68kg
Derating chart
100
90
80
ON
ratio 70
60
50
40
0 10 20
Ambient temperature
: Compatible,
QX10 Compatibility
16 points
Photocoupler
100-120VAC, 50/60Hz
Within 5%
Max. 200mA, within 1ms
(with 132VAC)
85 to 132VAC
(50/60Hz±3Hz)
*2
Refer to the derating chart.
(50Hz, 60Hz)
30VAC or less/1.7mA or less
(50Hz, 60Hz)
Approx. 12k (60Hz),
Approx. 15k (50Hz)
15ms or less
(100VAC 50Hz, 60Hz)
15ms or less
(100VAC 50Hz, 60Hz)
16 points/common
(Common terminal: TB17)
ON indication (LED)
18-point terminal block
(M3 × 6 screws)
2
0.3 to 0.75mm core
(Outside diameter: 2.8mm or
less)
R1.25-3
cannot be used.)
0.17kg
120VAC
132VAC
30 40 50 55
: Partially changed, × : Incompatible
Precautions for replacement
When seventeen or more points
are used, use two QX10 modules.
–
Rated input current is smaller.
Use it within the range shown in the
derating chart.
*1
OFF current is smaller.
Input impedance is greater.
×
×
Wiring change is required.
×
× The dimensions are different.
3
*1
*1
- 12