Mitsubishi Electric MELSEC-A0J2H Series Handbook page 202

(3) Specifications comparison between A0J2-E24R and interface module (SC-A0JQIF24R)
Specifications A0J2-E24R output specifications
Number of output points
Insulation method
24VDC 2A (Resistance load)/point
Rated switching voltage/
current
Minimum switching load
Maximum switching
voltage
Maximum switching
frequency
Mechanical life
Rated switching voltage/current load
(COS=0.7) 200,000 times or more
Electrical life
200VAC 0.75A, 240VAC 0.5A
(COS=0.35) 200,000 times or more
(L/R=7ms) 200,000 times or more
OFFON
Response
time
ONOFF
External
Voltage
supply
power
(Relay coil
Current
driving
power)
Surge suppressor
Fuse rating
Fuse blown indication
Relay socket
Common terminal
arrangement (Common terminal: TB9, TB19, TB29)
Operation indication
(Turning ON the output turns LED ON)
App
- 7
24 points
Photocoupler
24VDC 2A (Resistance load)/point
240VAC 2A (COS=1)/point
5A/common
5VDC 1mA
264VAC 125VDC
3600 times/hr
20 million times or more
Rated switching voltage/current load
200,000 times or more
200VAC 1.5A, 240VAC 1A
(COS=0.7) 200,000 times or more
(COS=0.35) 200,000 times or more
24VDC 1A, 100VDC 0.1A
10ms or less
12ms or less
24VDC±10%
Ripple voltage 4Vp-p or less
230mA
(24VDC All points are ON.)
None
None
–
None
8 points/common
(Common terminal: TB9, TB19, TB29)
Available
SC-A0JQIF24R output
specifications
24 points
None
240VAC 2A (COS=1)/point
5A/common
5VDC 1mA
264VAC 125VDC
3600 times/hr
20 million times or more
200,000 times or more
200VAC 1.5A, 240VAC 1A
200VAC 0.75A, 240VAC 0.5A
24VDC 1A, 100VDC 0.1A
(L/R=7ms) 200,000 times or more
9ms or less
11ms or less
24VDC±10%
Ripple voltage 4Vp-p or less
230mA
(24VDC All points are ON.)
None
None
–
None
8 points/common
None
: Compatible, : Partially changed, × : Incompatible
Compatibility Precautions for replacement
Photocoupler is provided on Q series
output module side.
In combination with Q series output
module:
10ms or less (6ms TYP.)
In combination with Q series output
module:
12ms or less (6ms TYP.)
Operation indication can be checked
with Q series output module.
*1
*1