Huawei SUN2000 Series User Manual page 61

SUN2000-(196KTL-H0, 200KTL-H2, 215KTL-H0)
Series
User Manual
Figure 7-1 Connection over a WLAN module or a Bluetooth module
(A) SUN2000
Figure 7-2 Connection over a USB data cable
(A) SUN2000
● When you use the SUN2000 app to set parameters for the inverter, setting
items on certain parameter setting screens are not displayed if the AC switch
between the inverter and the power grid is turned on but the three DC switches
on the inverter are not in the ON position. Switch the three DC switches to the
ON position and then reset relevant parameters.
● If you change the grid code, some parameters may be restored to factory
defaults. After the grid code is changed, check whether the previously set
parameters are affected.
● Delivering a reset, factory reset, shutdown, or upgrade command to the solar
inverters may cause power grid connection failure, which affects the energy
yield.
● Only professionals are allowed to set the grid parameters, protection
parameters, feature parameters, and power adjustment parameters of the solar
inverters. If the grid parameters, protection parameters, and feature parameters
are incorrectly set, the solar inverters may not connect to the power grid. If the
power adjustment parameters are incorrectly set, the solar inverters may not
connect to the power grid as required. In these cases, the energy yield will be
affected.
Issue 07 (2021-07-08)
NO TICE
NO TE
● Configurable parameters vary depending on the grid code. The actual screen may vary.
● The parameter names, value ranges, and default values are subject to change. The
actual display may vary.
Copyright © Huawei Technologies Co., Ltd.
(B) WLAN module or
Bluetooth module
(B) USB data cable
7 Man-Machine Interactions
(C) Mobile phone
(C) Mobile phone
54