Summary; Applicable Models - Mitsubishi Electric Lossnay LGH-100RX3-CAN Technical Manual

1. Summary

This is a technical manual relating to the controls for implementing the following systems of the commercial-type Lossnay ( LGH-
RX Series ) .
Possible System Configurations
(1) When using only the Lossnay remote controller.
( 2 ) Linking Lossnay and City Multi units.
( 3 ) Linking Mr. Slim ( A-control ) .
( 4 ) Lossnay central control systems.
( 5 ) Linking with external equipment ( BMS ) .

2. Applicable Models

Lossnay ( LGH-RX type )
These models have temperature sensors at RA and OA sides. It can automatically switch to the ventilation mode. (Loss-
nay/By-pass)
LGH-50RX -CAN
3
Lossnay Remote Controller ( PZ-41SLB-E )
Use when operating from 1 to 15 Lossnay units together at the same time. When using M-NET transmission to operate from
centralised control, use the PZ-52SF-E.
It can start and stop the unit, change fan speed, switch the ventilation mode. It also includes indicators that show errors and
when filter maintenance is required. Refer to page 170.
Lossnay M-NET Remote Controller ( PZ-52SF-E )
It can be used in combination with Mitsubishi Electric Air conditioner Network system ( MELANS ) . Refer to page 176. Since
this remote controller is supplied the power from the M-NET transmission line, it cannot be linked with Mr. Slim and other
such systems that do not use M-NET.
Please refer to the technical documentation for the other systems: City Multi, Mr. Slim
and the central controller ( MELANS ) .
LGH-100RX -CAN
3
LGH-200RX -CAN
3
107