System Designs Of M-Net - Mitsubishi Electric Lossnay LGH-100RX3-CAN Technical Manual

8. System Designs of M-NET

8.1 Address Definitions
An address is a unique number used to identify each air conditioner and controller.
Device
Indoor unit
Lossnay
Outdoor unit
Branch controllers
Local remote controller ( master )
Local remote controller
( secondary )
Central controller
K-transmission converter
Note:
There is no need to set the address unless the Lossnay is connected to the M-NET transmission cable.
System configuration example
Centralised
controller
( 000 )
Power supply unit for
transmission cable
140
Description
Set to specify in order each refrigerant system.
Set to specify in order each refrigerant system.
Minimum address of the indoor unit within the same
refrigerant system. ( +50 )
Minimum address of an outdoor unit. ( +1 )
Minimum address of an indoor unit or a Lossnay unit
within the same group. ( +100 )
Minimum address of the indoor unit or a Lossnay unit
inside the same group. ( +150 )
When the K-control unit is in control. ( 000 )
Minimum address of the K-control type indoor unit.
( +200 ) This cannot overlap with a system controller.
( 051 )
Outdoor unit
( 101 )
Indoor unit
ME remote controller
( 105 )
Lossnay M-NET
remote controller
(PZ-52SF-E)
( 213 )
K-transmission
converter
( 001 ) ( 002 )
Indoor unit
ME remote controller
( 005 ) ( 006 )
( 106 )
Lossnay Lossnay
Lossnay M-NET
remote controller
(PZ-52SF-E)
( 013 )
Indoor unit
K-control remote controller
( 015 )
Indoor unit
K-control remote controller
M-NET compatile
A-control Mr.Slim
outdoor unit
Address definition range
001 to 050
001 to 050 ( Note )
051 to 100
052 to 100
101 to 150
151 to 200
0, 201 to 250
201 to 250
( ) address
( 003 )
( 103 )
( 004 )
Indoor unit
Lossnay
( 007 )
( 107 )
Lossnay
Lossnay M-NET
remote controller
(PZ-52SF-E)
( 014 )
Indoor unit
K-control remote controller
( 016 )
Indoor unit
K-control remote controller
( 010 )
A-control Mr.Slim
indoor unit
Mr.Slim A-control
remote controller