Use - Silvercrest SKA 4.2 A1 Operating Instructions Manual

Use

CAUTION
► The maximum power output of the car
USB charging adapter is 4 .2 A .
The maximum power output of each
USB socket 2 is 2 .4 A . The maximum
power output of the two USB sockets
2 is 4 .2 A . The power output is
distributed depending on the devices
connected to the USB sockets 2 .
♦ Connect the car USB charging adapter
to your vehicle's on-board power supply
(cigarette lighter) . The white LED in
the housing indicates that the car USB
charging adapter is ready for use .
Depending on the vehicle type, it is pos-
sible that the ignition has to be switched
on first .
♦ Connect the charging cable to one of the
USB sockets 2 of the car USB charging
adapter and the USB socket of your
mobile terminal device . Charging starts
immediately and is indicated on the
display of the mobile device .
♦ After charging, remove the car USB
charging adapter from the cigarette lighter
by pulling on the pull ring 1 . Disconnect
the charging cable from the USB socket 2
on the car USB charging adapter .
■ 8 │ GB │ IE │ NI
SKA 4.2 A1