2.5-Inch Hard Drive; Removing The 2.5-Inch Hard-Drive Assembly - Dell OptiPlex 3090 Small Form Factor Service Manual

About this task
The following image indicates the location of the front bezel and provides a visual representation of the installation procedure.
Steps
1. Align and insert the front cover into the slots on the chassis.
2. Rotate the front cover towards the chassis and snap it into place.
Next steps
1. Install the side cover.
2. Follow the procedure in

2.5-inch hard drive

Removing the 2.5-inch hard-drive assembly

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the 2.5-inch hard-drive assembly and provide a visual representation of the
removal procedure.
16 Removing and installing components
After working inside your
Before working inside your
computer.
computer.