M.2 Solid-State Drive; Removing The M.2 2230 Pcie Solid-State Drive - Dell OptiPlex 3090 Small Form Factor Service Manual

Steps
1. Place the tabs on the right side of the hard-drive caddy onto the holders on the chassis and push the left side of the caddy
down until it clicks into place.
NOTE: Use the arrows seen on the caddy as guides to identify the tabs on the tray.
2. Connect the hard-drive data and power cables to the connectors on the hard drive.
Next steps
1. Install the side cover.
2. Follow the procedure in

M.2 solid-state drive

Removing the M.2 2230 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 3.5/2.5-inch hard-drive
5. Remove the hard-drive and optical-drive
24 Removing and installing components
after working inside your
Before working inside your
assembly.
bracket.
computer.
computer.