Table of Contents
Advertisement
Steps
1. Align the hard drive with the mounting points on the caddy and place the hard drive onto it.
2. Pull the tabs on the right side of the bracket until the hard drive clicks into place.
Next steps
1. Install the
front
bezel.
2. Install the
side
cover.
3. Follow the procedure in
Installing the 3.5-inch hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the 3.5-inch hard-drive assembly and provides a visual representation of the
installation procedure.
After working inside your
computer.
Removing and installing components
23
Advertisement
Table of Contents
