Removing The Hard-Drive Bracket - Dell OptiPlex 3090 Small Form Factor Service Manual

Steps
1. Disconnect the hard-drive data cable and power cable from the connectors on the hard drive.
2. Push the left tab towards the hard drive to free the assembly from the chassis.
3. Release the hard-drive assembly from the tabs on the right side and slide the hard-drive assembly out.
NOTE: Note the orientation of the hard drive so that you can replace it correctly.

Removing the hard-drive bracket

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 2.5-inch hard-drive
About this task
The following images indicate the location of the hard-drive bracket and provide a visual representation of the removal
procedure.
Before working inside your
assembly.
computer.
Removing and installing components 17