Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
Next steps
1. Install the
hard-drive and optical-drive
2. Install the
3.5/2.5-inch hard-drive
3. Install the
side
cover.
4. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
heat-sink and fan
4. Remove the
3.5/2.5-inch hard-drive
5. Remove the
hard-drive and optical-drive
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
44
Removing and installing components
bracket.
assembly.
after working inside your
Before working inside your
assembly.
assembly.
bracket.
computer.
computer.