Expansion Card; Removing The Graphics Card - Dell OptiPlex 3090 Small Form Factor Service Manual

Steps
1. Place the coin cell battery onto the socket on the system board. Ensure that the "+" sign is facing up and the tabs on the
lower portion of the socket and holding the battery.
2. Gently push the battery into the socket until it locks in place.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Expansion card

Removing the graphics card

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.
40 Removing and installing components
After working inside your
Before working inside your
computer.
computer.