Removing The M.2 2280 Pcie Solid-State Drive - Dell OptiPlex 3090 Small Form Factor Service Manual

Steps
1. Align the solid-state drive with the socket on the system board and slide it in.
2. Replace the screw (M2X3) that secures the M.2 PCIe solid-state drive to the system board.
Next steps
1. Install the hard-drive and optical-drive
2. Install the 3.5/2.5-inch hard-drive
3. Install the front bezel.
4. Install the side cover.
5. Follow the procedure in

Removing the M.2 2280 PCIe solid-state drive

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
4. Remove the 3.5/2.5-inch hard-drive
5. Remove the hard-drive and optical-drive
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
26 Removing and installing components
bracket.
assembly.
After working inside your
Before working inside your
assembly.
bracket.
computer.
computer.