Replacing The Maintenance Tanks - Epson Stylus Pro 11880 User Manual

Note: The print head
nozzles may dry out while
you replace the cutter
blade, so make sure you
run a nozzle check after
you are finished. See
page 124 for instructions.
Maintaining and Transporting the Printer
2. Push down on the side pin while turning the latch to the left.
3. Close the front cover. The cutter moves to the home (far right) position.

Replacing the Maintenance Tanks

The maintenance tanks store ink that gets flushed from the system during
the initial ink charge and manual and automatic print head cleaning. The
three maintenance tanks are located on the back of the printer as shown:
5-135
Center tank
Right tank
| 135
Left
tank