Removing Paper From The Spindle - Epson Stylus Pro 11880 User Manual

52 | Handling Paper and Other Media
Note: Opening the front
cover causes printing to
stop. Do not open the
front cover while printing
is in progress, or your
print quality might be
affected.
Tip: To avoid indenting
or creasing the paper,
remove it from the paper
path and roll it up when
you are not printing.
8. Move the paper lever to the locked position, then close the roll paper
cover.
Roll paper
cover
Front cover
9. Press the Pause button (or wait for 5 seconds). The paper feeds into
printing postion automatically.
10. When you see a question on the display about the type of media you
want to use, select
the setting and press

Removing Paper from the Spindle

1. Make sure the printer is turned on, and the
2. Open the roll paper cover, then release the paper lever. If the media
tracking system is set up to scan the barcode when you load paper, the
paper lever will be locked. Press and hold the
to unlock the paper lever.
2-52
if the media is correct, or select
Yes
.
, then change
No
Pause light is not flashing.
button for 3 seconds