Epson Stylus Pro 11880 User Manual page 59

4. Press d to feed the paper.
5. Pull the paper around the back of the take-up reel core and use three
pieces of tape to attach the paper to the core.
6. Press d to feed the paper and create some slack.
7. Hold down the
Auto Backward
the take-up reel and wind a small length of paper. Make sure there is
enough slack between the paper and the take-up reel core.
8. When you're ready to print, make sure Auto Cut is set to
printer driver.
9. Press the
Auto Backward
print job to the printer.
2-59
Handling Paper and Other Media
button on the control panel to rotate
button on the control panel, then send your
| 59
in the
Off