Configuring The Network Interface - Epson Stylus Pro 11880 User Manual

36 | Setting Up the Printer
Note: If you don't know
which setting to use, see
your network administrator
for help configuring the
printer's IP settings.

Configuring the Network Interface

You can configure the network interface using the control panel, as described
below, or using the EpsonNet Config utility, as described on page 40.
1. Make sure the printer is turned on.
2. Press the r
Menu
3. Press d to highlight
4. Press r then d to highlight
5. Press . An asterisk appears next to
6. Press l then d to highlight
7. Press r and then u or d to choose one of the following IP configuration
settings:
Select this setting if your network uses a DHCP server to
• AUTO:
configure your network devices' IP settings automatically.
Select this setting if you would like to configure the
• PANEL:
printer's IP settings manually.
8. Press . An asterisk appears next to the setting you selected.
9. Press l to go back. Then do one of the following:
If you selected
•
Pause button to exit the printer menu. Then continue with
step 14.
If you selected
•
with step 10.
10. Press d to highlight
displays the IP address.
11. Press u or d to change each octet value, then press r to select the next
octet. When you have changed the value of the last octet, press
LCD displays the subnet mask.
1-36
button on the printer's control panel.
NETWORK SETUP
ENABLE.
ENABLE
IP ADDRESS SETTING
as the IP ADDRESS SETTING, press the
AUTO
as the IP ADDRESS SETTING, continue
PANEL
IP, SM, DG SETTING
, then press r.
to show that it's selected.
.
, then press r. The LCD
. The
r