Checking Error Messages And Lights - Epson Stylus Pro 11880 User Manual

144 | Solving Problems
Message
BORDERLESS ERROR
LOAD THE SUPPORTED
PAPER SIZE OR LOAD PAPER
PROPERLY
CARRIAGE LOCKED
RELEASE THE CARRIAGE
LOCK
CLEANING ERROR
PRESS PAUSE BUTTON
CLEANING ERROR
REMOVE THICK PAPER

Checking Error Messages and Lights

The control panel includes various lights and an LCD display to indicate the
status of the printer:
Pause or reset
button and light
Power
light
Power
button
Paper light
Ink light
When your ink or paper runs out or a problem occurs, a message appears on
the LCD display, and the lights on the control panel come on or flash. The
following table lists the messages in alphabetical order and includes an
explanation and instructions for correcting the problem.
Explanation
The borderless setting is
selected, and paper that
doesn't support borderless
printing is selected, or
paper is not loaded
correctly.
The print head is locked.
Head cleaning did not clear
the nozzles.
Paper is too thick for head
cleaning.
6-144
Paper feed up button
Enter or barcode
Menu or cleaning button
button
LCD display
Paper source
or cut button
Response
Press and hold the
3 seconds to cancel the print job. Change the
setting in the printer driver or load different
paper. Make sure paper is loaded correctly.
Remove the brackets securing the print head;
see page 31.
Run the head cleaning utility again. If the
nozzles are still clogged, contact Epson.
Release the paper lever to remove the paper,
then reset the lever. Head cleaning starts
automatically. After cleaning, reload paper.
Take-up
reel
buttons
Paper feed down button
Pause button for