NEC Express5800 Series User Manual page 122

Chapter 3 Setup
Category
Security Set a password
Restrict bootup by entering
password
Executing TBOOT
(Trusted Boot) by using
the optional TPM kit
UPS When the server is
Powerlink supplied with power from
UPS, always turn on the
power.
If it is turned off by using
POWER switch, leave it
OFF even when UPS
supplies power.
Keep the power OFF even
when UPS supplies power.
122
Description
Security → Administrator Password →
Enter a password
(Set a password for Administrator first and
then User)
Security → Password on Boot → Enabled
Install the optional TPM kit, and specify
[Enabled] for the items below under the
Trusted Computing submenu in Security.
・[TPM Support]
・[TPM State]
・[TXT Support]
Server → Power Control Configuration →
AC-LINK → Power On
Server → Power Control Configuration →
AC-LINK → Last State
Server → Power Control Configuration →
AC-LINK → Stay off
Express5800/R120g-1E User's Guide
To be changed
2. BIOS Setup Utility (SETUP)
Remark
There are two types of
password; Administrator and
User.
Settings for User password is
limited compared to for
Administrator.
Can be selected when
password is set.
Do not disable TPM by using
the TPM management module
and others under the state that
[Enabled] is specified for TXT
Support and OS is started up.
That causes unavailability of
changing TPM Support and
TXT Support.
At that time, select and perform
Save & Exit – Load Setup
Defaults.