NEC Express5800 Series User Manual page 84

Chapter 2 Preparations
Model Product
name
PCI card type *2
Transfer bandwidth
Available card size
N8104-145 1000BASE-T Adapter(2ch)
[PCI Express 2.0(x4)]
N8104-152 1000BASE-T Adapter (4ch)
[PCI Express 2.0(x4)]
N8104-155 10GBASE-T LOM card
*5 (2ch) [PCI Express 3.0(x8)]
N8104-153 10GBASE-T Adapter (2ch)
[PCI Express 2.0(x8)]
N8104-157 10GBASE-T Adapter (2ch)
[PCI Express 3.0(x4)
N8104-156 10GBASE-SFP+(2ch)+
1000BASE-T(2ch) LOM card
[PCI Express 3.0(x8)]
N8104-149 10GBASE Adapter
(SFP+/2ch) [PCI Express
2.0(x8)]
N8104-148 10GBASE Adapter
(SFP+/2ch) [PCI Express
2.0(x8)]
N8104-146 InfiniBand Adapter (1ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-147 InfiniBand Adapter (2ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8118-01 PCIe SSD Adapter (365GB)
( PCI Express 2.0(x4))
N8117-01A Additional RS-232C connector
*3
: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
*4 Performance of LAN depends on the application and memory capacity. If you want to mount three or more 10G LAN cards, a sufficient verification
under your system environment is needed.
*5 Change the "Above 4G decoding" setting to [Disabled] to use the PXE Boot function if you set Boot Mode to [Legacy].
84
Slot number #1A
PCI standard
PCI slot
performance *1
(per lane) *1
Slot size
For RAID
Controller
－
－
－
－
－
－
－
－
－
－
－
－
Express5800/R120g-1E User's Guide
Riser card (PCIex8)
#1B #1C #1D
PCIe 3.0
x8 lane
x8 socket
8Gb/s
Full height Low profile
For LOM
card
220mm max.
－ ○ ○
－ ○ ○
○ － －
－ ○ ○
－ ○ ○
○ － －
－ ○ ○
－ ○ ○
－ ○ ○
－ ○ ○
－ ○ ○
－ ○ ○
1. Installing Internal Options
(2/2)
Remarks
For additional LAN port
For additional LAN port.
A LAN cable with modular
cover cannot be used.
For additional
LAN port
For additional
LAN port
For additional
LAN port
For additional
LAN port.
Up to three
cards in total
Prepare SFP+
can be
module
installed. *4
N8104-129 if
needed
Up to two
For additional
units of
LAN port.
WS2008
Prepare SFP+
(x86) can be
module
installed.
N8104-129 if
needed
For additional
LAN port.
Prepare SFP+
module
N8104-129 if
needed
SSD to be Cannot be
mounted to used together
PCI slot with each
other.
SSD to be
mounted to
PCI slot
SSD to be mounted to PCI slot
For additional serial port B
(RS-232C)
Only one unit can be mounted
at the maximum.