NEC Express5800 Series User Manual page 86

Chapter 2 Preparations
Model Product Slot number
name
PCI standard
PCI slot
performance *1
PCI card type *2
Transfer bandwidth
(per lane) *1
Slot size
Available card size
N8104-145 1000BASE-T Adapter (2ch)
[PCI Express 2.0(x4)]
N8104-152 1000BASE-T Adapter (4ch)
[PCI Express 2.0(x4)]
N8104-155 10GBASE-T LOM card
*5 (2ch) [PCI Express 3.0(x8)]
N8104-153 10GBASE-T Adapter (2ch)
[PCI Express 2.0(x8)]
N8104-157 10GBASE-T Adapter (2ch)
[PCI Express 3.0(x4)
N8104-156 10GBASE-SFP+(2ch)+
1000BASE-T(2ch) LOM card
[PCI Express 3.0(x8)]
N8104-149 10GBASE Adapter
(SFP+/2ch) [PCI Express
2.0(x8)]
N8104-148 10GBASE Adapter
(SFP+/2ch) [PCI Express
2.0(x8)]
N8104-146 InfiniBand Adapter (1ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8104-147 InfiniBand Adapter (2ch)
(FDR/Optical)
[PCI Express 3.0(x8)]
N8118-01 PCI SSD Adapter
[PCI Express 2.0(x4)]
N8117-01 Additional RS-232C
A connector *3
: Can be mounted, –: Cannot be mounted
Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
*1
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
*
4 Performance of LAN depends on the application and memory capacity. If you want to mount three or more 10G LAN cards, a sufficient verification
under your system environment is needed.
*5 Change the "Above 4G decoding" setting to [Disabled] to use the PXE Boot function if you set Boot Mode to [Legacy].
･ For details about the functions of each card, see "Technical Guide".
･ The description in brackets [ ] of the product name refers to the maximum operating performance.
･ The system operates in the lower performance when it differs between the PCI slot and PCI board.
86
Riser card (PCIex16)
#1A #1B #1C
PCIe 3.0
x8 lane
x8 socket
8Gb/s
Full height
For RAID For LOM
Controller card
－ － ○
－ － ○
－ ○ －
－ － ○
－ － ○
－ ○ －
－ － ○
－ － ○
－ － ○
－ － ○
－ － ○
－ － ○
Express5800/R120g-1E User's Guide
#1D
X16 lane
X16 socket
Low profile
220mm max.
○ For additional LAN port
○ For additional LAN port.
A LAN cable with modular cover
cannot be used.
For additional
－
LAN port
For additional
○
LAN port
○ For additional
LAN port
For additional
－
LAN port.
Prepare SFP+
module N8104-
129 if needed.
For additional
○
LAN port.
Prepare SFP+
module N8104-
129 if needed.
For additional
○
LAN port.
Prepare SFP+
module N8104-
129 if needed.
For Infiniband
○
connection.
○ For Infiniband
connection.
○ SSD to be mounted to PCI slot
○ For additional serial port B
(RS-232C) Only one unit can be
mounted at the maximum.
1. Installing Internal Options
(2/2)
Remarks
Up to 3 cards in
total can be
installed.*4
Up to 2 units
can be installed
For WS2008
(x86).
Cannot be
used together
with each
other.