NEC Express5800 Series User Manual page 135

Express server
Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 4 Appendix
Code Number
CPU
CPU
Clock speed
Number of CPUs, standard / maximum
Intel Smart Cache (Last Level Cache)
Number of cores (C) / Number of
threads (T) per CPU
Chipset
Memory
Capacity, standard/maximum
Memory module
Maximum operating frequency
Error check, correction
Memory sparing
Memory mirroring
Storage
Hard disk drive
Interface / RAID level
Optical disk drive
FDD
Expansion bay
Expansion
Supported slots
slots
Graphics
Chip / Video RAM
Graphic display / resolution
Interface
Redundant power supply
Redundant fan
External dimensions (width × depth × height)
Weight (Minimum *3/ Max.)
Power supply unit
Power consumption
(100 V at maximum configuration, at 25ºC high-load
state)
Power consumption
(100 V at maximum configuration, at maximum power)
Environmental requirements
Temperature/Humidity
Main accessories
Installed OS:
Supported OSs:
*1
If you do not intend to install an internal DVD-ROM or an internal DVD SuperMULTI in all systems, prepare at least one external DVD-ROM per
system for maintenance and OS reinstallation purposes.
*2
Prepare this if required. For the principal uses of a Flash FDD, see the notes on Flash FDD in Maintenance Guide.
*3
Minimum configuration for operation (1x CPU, 1x DIMM, 1x HDD, 1x Power supply unit, LOM card)
1037F
Intel Xeon processor
E5-2650L v4
1.70GHz
1/2
35MB
14C/28T
Intel C612 chipset
None (optional) /Registered DIMM : 384 GB (24x 16 GB), Load Reduced DIMM : 768 GB (24x
32 GB)
DDR4-2400 Registered DIMM (4/8/16/32 GB), DDR4-2400 TSV Registered DIMM (64 GB)
2400MHz
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Supported
Supported
Internal
(standard)
Internal
2.5-inch HDD: SATA 8 TB (8x 1 TB), SAS 14.4 TB (8x 1.8 TB),
(maximum)
2.5-inch SSD: SATA 6.4 TB (8x 800 GB), SAS 3.2 TB (8x 400 GB)
Hot swap
Supported
SATA 6 Gb/s : RAID 0/1/5/6/10/50/60 (optional),
SAS 12 Gb/s : RAID 0/1/5/6/10/50/60 (optional)
Internal or external drive (optional) *1
Optional: Flash FDD (1.44 MB) *2
-
1x PCI Express 3.0 (x8 lane, x8 socket)(full-height, length 220 mm)
1x PCI Express 3.0 (x8 lane, x8 socket) (low-profile, length 220 mm)(Optional)
1x PCI Express 3.0 (x8 lane, x8 socket) (for RAID controller)
1x PCI Express 3.0 (x8 lane, x8 socket) (for LOM card)
With optional riser card installed, can be changed to PCI Express 3.0 (x16 lane, x16 socket).
Embedded management controller chip / 32 MB
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024, 1,600x1,200
5x USB3.0 (2x front, 2x rear, 1x internal), 1x USB2.0 (1x internal)
2x Analog RGB (Mini D-Sub15 pin, 1x front, 1x rear)
1x Serial port (RS-232C compliant / D-Sub 9 pin, Serial port A, 1x rear, optional port can be
used (up to two ports in total),
1x Management LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ45, 1x rear) (With
optional LOM card, 4x 1000BASE-T, 2x 10GBASE-T, 2x 10GBASE-SFP+, or 2x 1000BASE-T
can be added)
Supported (optional, hot-plug available)
Supported (standard, hot-plug available)
439.8 mm x 722.0 mm x 43.4 mm (front bezel / protrusions / inner rails excluded)
482.4 mm x 766.1 mm x 43.4 mm (front bezel / protrusions / inner rails included)
13.3kg / 21.0kg (including rails)
None (optional),
AC power supply unit
460 W/800 W 80 PLUS Platinum compliant (bipolar grounded outlet) (hot-plug available) (Max:
2)
AC 200 V ± 10%, 50/60 Hz ± 3 Hz (Power cable is a required option)
800 W 80 PLUS Titanium compliant (bipolar grounded outlet) (hot-plug available) (Max: 2)
AC 200 V ± 10%, 50/60 Hz ± 3 Hz (Power cable is a required option)
330VA/328W
512VA/508W
Operating: 10 to 40°C / 20 to 80%,
Storage: –10 to 55°C / 20 to 80% (no condensation either when operating or when stored)
Getting Started, Safety Precautions and Regulatory Notices, slide rails, Front Bezel
Microsoft Windows Server 2008 R2 Standard,
Microsoft Windows Server 2008 R2 Enterprise,
Microsoft Windows Server 2012 Standard,
Microsoft Windows Server 2012 Datacenter,
Microsoft Windows Server 2012 R2 Standard,
Microsoft Windows Server 2012 R2 Datacenter,
VMware ESXi™ 5.5 Update 2,
VMware ESXi™ 6.0
Express5800/R120g-1E User's Guide
N8101-
1045F
E5-2609 v4
E5-2660 v4
1.70GHz
2.00GHz
20MB
35MB
8C/8T
14C/28T
1866MHz
2400MHz
265VA/263W
445VA/442W
456VA/453W
626VA/622W
1. Specifications
1046F
135

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120g-1e

Table of Contents