Advertisement
1 – 2.MOUNTING PRECAUTIONS
• When installing, removing or moving the monitor, ensure that this
is carried out by at least 2 people.
•Be sure to use a wall-mount bracket designed or designated for
mounting the monitor.
•This monitor is designed to be installed on a concrete wall or
pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting
installation. This monitor and bracket must be installed on a wall
which can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material and
the structure.
•To attach a VESA-compliant mounting bracket, use M6 screws
that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit bottom
and the side of unit. Do not hold the LCD panel or corners. This
may cause product damage, failure, or injury.
•Do not use any screw holes other than VESA holes for
installation.
■Removeing the attachment plate
(Caution)
The attachment plate is only for use with the monitor. Do not use
with any other devices.
1.
Spread a thick, soft cloth (blanket, etc.) that will prevent damage
to the LCD panel on a stable flat surface where the entire
monitor can be placed, and place the monitor with the LCD
panel face down on the cloth.
2.
Remove the screws(x4) that fasten the attachment plate, and
remove the attachment plate.
■Toppling prevention
(Caution)
•To reduce the risk of injury and damage caused by the product
toppling or falling in an earthquake or similar situation, take
measures to prevent toppling and falling.
• If the wall or platform on which the monitor is installed is not
PN-K321/K322B INSTALLATION, ADJUSTMENT, SETTING 2 - 2
sufficiently strong, the effectiveness of the toppling/ falling
prevention measures will be severely compromised. Reinforce the
wall or platform as needed.
The toppling/falling prevention measures are intended to reduce
the risk of injury and damage in an earthquake, however,
the effectiveness of the measures is not guaranteed in all
earthquakes.
• Before implementing the toppling prevention measures,
complete all connections.
(Secure to wall or post)
1. Attach a commercially available eye bolt (a bolt shaped to allow
attachment of a string or cord) to the wall or post.
Verify that the eye bolt is attached firmly and does not come out.
2. Run a commercially available cord of sufficient strength through
the cable clamp attachments and the eye of the eye bolt on the
wall or post to secure the monitor.
Advertisement
