Advertisement
2 - 4.INITIALIZATION (RESET)/FUNC-TIONAL
RESTRICTION SETTING (FUNCTION)
You can return the settings to their factory-preset values and restrict operations.
1. Hold down the [MENU/ENTER] button and [INPUT/RETURN] button at the same time until "F" appears in the screen, and then press the
[MENU/ENTER] button and [VOL-/] button at the same time while "F" appears.
2. Select and set the items.
ALL RESET
Resets the settings to the factory default
settings.
Select ALL RESET, and then press
[MENU/ENTER] button.
After initialization, turn the main power
switch off and then back on.
ALL RESET.......Resets all the settings to
the factory default settings.
CANCEL............Go back without resetting.
ADJUSTMEN
You can disable operations on the monitor
T LOCK
buttons.
OFF....Enables operation.
ON 1...Disables all operations other than
turning power on/off and FUNCTION.
ON 2...Only the FUNCTION operation is
enabled.
Disables all operations other than
FUNCTION (not even power on/off).
RS-232C
Specifies whether to allow control via
RS-232C.
OSD DISPLAY
Shows/hides the menu, modes and
messages.
The FUNCTION screen cannot be hidden.
ON 1............... Shows all menus, modes
and messages.
ON 2............... Hides messages
automatically
displayed by the display. Shows messages
during operation.
OFF................ Hides all menus, modes
and messages.
LED
Specifies whether to light the power LED.
PN-K321/K322B INSTALLATION, ADJUSTMENT, SETTING 2 - 15
Advertisement
