Advertisement
■ USE INSTRUCTIONS
1 ) Execute "ServiceToolsLauncher.exe" in the folder where the
service tool is extracted.
(MEMO)
・If it cannot be executed, the library may not be installed. In this
case, please install the library, referring to Installation
Procedures shown above. 3 Refer to page 4 - 13
■ INSTALLATION PROCEDURES".
・In case of the window of "User Account Control" is displayed
as shown below, need to click [Allow].
2 ) Once the service tool is booted, press the button as needed to
conduct operations.
PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4 - 12
Button
Description
White Balance
Read/Write white balance settings of
the display.
Gamma
Used to read/write the gamma setting of
this machine.
Serial Number
Read/Write serial number of the display.
Usage Time
Read/Write usage time of the display.
Model Name
Read/Write model name of the display.
TP
Gap of the touch position of a touch
AccuracyCheck
panel is checked.
TP Calibration
The touch position of a touch panel is
adjusted.
TP
The drawing test of a touch panel is
DrawingCheck
done.
InfoDisp Report
Read operation log and temperature
data of the display.
User Setting
Used to backup the user data of this
Value
machine.
Main Firmware
Write firmware in the display by
RS-232C.
Sub Firmware
Write Sub firmware in the display by
RS-232C.
Make Usb Data
Copy firmware data for USB memory to
specified folder.
Advertisement
