NEC N8100-2089F User Manual page 126

Chapter 2 Preparations
(4) 3.5-inch fixed type HDD cage
(a) When using SW RAID for 3.5-inch fixed type HDD cage (1 to 4 HDDs)
Use optional K410-256(00) internal SAS/SATA cable to connect 3.5-inch fixed type HDD cage with
motherboard. Connect power cable to power connector of K410-256(00) internal SAS/SATA cable.
Refer to When using SW RAID for 2.5-inch HDD cage (1 to 4 HDDs) for connectors on motherboard and RAID
configuration jumper switch setting.
Connector on motherboard
SATA0 (SATA cable 0)
SATA1 (SATA cable 1)
SATA2 (SATA cable 2)
SATA3 (SATA cable 3)
(b) When using optional RAID Controller for 3.5-inch fixed HDD cage (1 to 4 HDDs)

The 3.5-inch fixed type HDD cage can use four hard disk drives.

The 3.5-inch fixed type HDD cage cannot be connected with the N8103-168 RAID Controller.
126
0 (SAS/SATA cable 0)
1 (SAS/SATA cable 1)
2 (SAS/SATA cable 2)
3 (SAS/SATA cable 3)
Connect cables
Global Global
Fault Activity
LED LED
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
HDD
SAS 2 (Ports4-7)
SAS 1 (Ports0-3)
Red cable