Table of Contents
Advertisement
Chapter 1 General Description
(1)
Processor (CPU) socket
-1: Processor #1 (CPU #1)
-2: Processor #2 (CPU #2)
(2)
DIMM socket
(3)
DC connector
(4)
DC connector
(5)
DC connector
(6)
PM-BUS connector
(7) Connector for power supply unit cooling fan
(8) Connector for front cooling fan
(9) Connector for rear cooling fan
(10) Connector for front cooling fan
Connector for optional redundant cooling fan
(11) Serial ATA connector
(the number after hyphen indicates port number)
(12) Unused connector
(13) Front Panel connector
(14) USB connector (front)
(15) Lithium battery
(16) Clear CMOS Jumper
(17) Clear Password Jumper
(18) RAID Configuration Jumper
(19) Power configuration jumper
(20) Fan configuration jumper
(21) Unused jumper switch
(22) Serial ATA (DVD) connector
(23) Internal USB device
(24) Connector for internal flash memory
(25) TPM kit connector
(26) SPI Flash Mezzanine connector
EXPRESSSCOPE Profile Key (SPI flash memory) has
been installed, where BIOS and BMC configuration data is
stored. Relocate it when replacing MB to keep using the
data.
(27) Connector for option COM
(28) BMC RESET Switch
The switch to reset BMC of this server. Use the switch only
when there is something wrong with EXPRESSSCOPE
Engine 3 (BMC).
To use this switch, press it at least five seconds. The
remote management feature is disabled for about 40
seconds after BMC is reset.
(29) Connectors for external devices
(30) PCI slots
(30-1) PCI EXPRESS3.0 x8
(30-2) PCI EXPRESS3.0 x8
(30-3) PCI EXPRESS3.0 x16
(30-4) PCI EXPRESS2.0 x4 (x8 connector)
(30-5) PCI EXPRESS2.0 x1 (x4 connector)
(31) Connector for side cover open switch
(32) LED cable connector
When connecting 3.5-inch fixed HDD cage using optional
RAID controller, use this connector to connect a cable to
LED connector on RAID controller.
(33) SGPIO cable connector
When using optional hot-swap HDD cage, use this
connector to connect a cable to SGPIO connector on HDD
cage.
(34) SGPIO signal connector
Use this connector to connect with SGPIO signal
connector of optional K410-258(00) cable.
(35) Buzzer
(36) Flow sensor connecter
Use this connector to connect flow sensor cable of optional
filter replacement sensor
Express5800/T120e User's Guide
4. Names and Functions of Parts
41
Advertisement
Table of Contents
