Specifications - NEC N8100-2089F User Manual

Chapter 4 Appendix
1.

Specifications

Model
CPU Type
Clock speed
Standard/Maximum
3rd cache
Number of cores (C) /
Number of threads (T) (1 CPU)
Chipset
Memory Standard/Maximum
Memory module
Maximum clock speed
Error check, correction
Memory Sparing
Memory Mirroring
Auxiliary Drive bay
storage
device
Interface level /
RAID System
Optical disk drive
Device bay
Expansi Supported slot
on slots
Graphics Chip / VideoRAM
Graphic display /
resolution
Interface
Redundant power supply
Redundant fan
External dimensions
(width  depth  height)*2.
Weight (Min.*3/ Max.)
Power supply
Power consumption (100V at maximum
configuration, standby state)
Power consumption (100V at maximum
configuration, high-load state)
Environmental requirements
Temperature/Humidity
Main accessories
Installed OS
Supported OSs
*1 If you do not intend to install an internal DVD-ROM or an internal DVD SuperMULTI in all systems, prepare at least one external DVD-ROM per
system for maintenance and OS reinstallation purposes.
*2 For outer dimension of server including dust-proof kit, refer to "Dust-proof kit and dust-proof filter" in System Configuration Guide.
*3 Minimum configuration allowable for operation (1x CPU, 1x DIMM, and 1x HDD)
172
Intel ®Xeon® processor
E5-2403 v2 E5-2407 v2
1.80GHz 2.40GHz
1/2
10M
4C/4T
Intel ® C602 chipset
Not pre-installed / Registered DIMM: 384GB(12x 32GB)
DDR3L-1333 Registered DIMM(32GB), DDR3L-1600Registered DIMM(4/8/16GB)
1333MHz
ECC, x4 SDDC, Memory LockStep (x8 SDDC)
Supported
Supported
Standard –
Maximum When 2.5-inch HDD cage (3x N8154-42F) is selected: SATA 24TB (24x 1TB), SAS 28.8TB (24x
1.TB), SAS SSD 9.6TB (24x 400GB)
When 3.5-inch HDD cage (2x N8154-44F) is selected: SATA 32TB (8x 4TB)
When 3.5-inch Fixed HDD cage (N8154-43F) is selected: SATA 16TB (4x 4TB)
Hot swap Supported (N8154-42F or N8154-44F is installed)
SATA 3Gb/s or 6Gb/s : RAID 0/1/10 (Standard), RAID 5/6/50/60 (Option),
SAS 6Gb/s : RAID 0/1/5/6/10/50/60 (Option)
Internal DVD-ROM or internal DVDSuperMULTI (Option) *1
5.25-inch device bay x2
1x PCI EXPRESS 3.0(x16 lane, x16 socket) (Full height, 300mm in length)
2x PCI EXPRESS 3.0(x8 lane, x8 socket) (Full height, 300mm in length) (Only one slot is
available in 1-CPU configuration.)
1x PCI EXPRESS 2.0(x4 lane, x8 socket) (Full height, 300mm in length)
1x PCI EXPRESS 2.0(x1 lane, x4 socket) (Full height, 300mm in length)
Management controller chip / 32MB
16,770,000 colors: 640x840, 800x600, 1,024x768, 1,280x1,024
9x USB 2.0(2x Front, 4x Rear, x3 Internal), 1x Analog RGB (Mini D-sub 15 pin, 1x Rear),
1x Serial port (RS-232C compliant /D-sub 9 pin, serial port A, 1x Rear, optional port can be used
(up to two ports in total)),
2x 1000BASE-T LAN connector (1000BASE-T/100BASE-TX/10BASE-T supported, RJ45, 2x Rear),
1x Management LAN connector (100BASE-T/10BASE-T supported, RJ45, 1x Rear)
Supported (hot-plug available)
Supported (option, hot-plug available)
N8100-2089F:
200.0mm x 599.0mm x 438.0mm (Front bezel, projections are excluded)
200.0mm x 611.0mm x 438.0mm (Front bezel, projections are included)
N8100-2090F or N8100-2091F:
200.0mm x 599.0mm x 438.0mm (Front bezel, projections are excluded)
200.0mm x 626.0mm x 438.0mm (Front bezel, projections are included)
17kg / 33kg
N8100-2089F:
700W 80 PLUS® Glod compliant (bipolar grounded outlet) (hot-plug unavailable, AC
100/200V±10%)
N8100-2090F or N8100-2091F:
2x 450W or 800W 80 Plus® Platinum compliant (bipolar grounded outlet) (hot-plug available, AC
100/200V±10%, 50/60Hz±3Hz)
304VA/302W 275VA/273W
372VA/371W 362VA/361W
Operating: 10 to 40C /20 to 80%,
Storage: -10 to 55C /20 to 80%(no condensation either when operating or when stored)
EXPRESSBUILDER (NEC ESMPRO Manager) (Windows),
NEC ESMPRO Agent, User's Guide (electronic document) included),
Getting Started, Notes on Use, Warranty, Security key
–
Microsoft Windows Server 2008 Standard (RTM, SP2 or later), Microsoft Windows Server 2008
Enterprise (RTM, SP2 or later),
Microsoft Windows Server 2008 Standard (x64) (RTM, SP2 or later), Microsoft Windows Server
2008 Enterprise (x64) (RTM, SP2 or later),
Microsoft Windows Server 2008 R2 Standard (RTM, SP1 or later), Microsoft Windows Server
2008 R2 Enterprise (RTM, SP1 or later),
Microsoft Windows Server 2012 Standard, Microsoft Windows Server 2012 Datacenter
Red Hat Enterprise Linux 5.9 or later (x86), Red Hat Enterprise Linux 5.9 or later (EM64T)
Red Hat Enterprise Linux 6.4 or later (x86), Red Hat Enterprise Linux 6.4 or later (x86_64)
Express5800/T120e User's Guide
N8100-2089F or N8100-2090F or N8100-2091F
E5-2420 v2 E5-2430 v2
2.20GHz 2.50GHz
15M
6C/12T
1600MHz
274VA/272W 269VA/267W
435VA/433W 457VA/455W
1. Specifications
E5-2440 v2 E5-2470 v2
1.9GHz 2.40GHz
20M 25M
8C/16T 10C/20T
308VA/306W 284VA/282W
518VA/516W 568VA/566W