Table of Contents
Advertisement
Chapter 1 General Description
4.7
Status Indicators
This section explains the indication and meanings of the server LEDs.
4.7.1
POWER LED (
POWER LED lights green when the server is on. The light turns off when power is not being supplied to the
server. The LED lights amber when power cord is connected to power outlet until the server becomes ready
to power-on.
4.7.2
STATUS LED (
While hardware is operating normally, STATUS LED lights green. STATUS LED is off or flashes green or
lights/flashes amber if there is a hardware failure.
The following table lists STATUS LED patterns, their explanation and solution.
42
)
)
Once you have installed NEC ESMPRO, you can reference error logs to check the
Tips
causes of failures.
The STATUS LED does not reflect the disk drive failure if 3.5-inch fixed disk drive
Tips
is connected by using RAID controller.
Express5800/T120e User's Guide
4. Names and Functions of Parts
Advertisement
Table of Contents
