ABB AccessControl System Manual page 21

[2] "RF/IP Gateway"
The "RF/IP Gateway" extends the activation capacity of the "Smart Access Point Pro" to the
"Electronic cylindrical lock". Up to 64 "RF/IP Gateway" can be connected to a "Smart Access
Point Pro". The connection is made via a PoE switch.
The "RF/IP Gateway" has the following main functions:
Activation of up to 16 "Electronic cylindrical lock".
■
Transferring the communication between the activated "Electronic cylindrical lock" and the
■
"Smart Access Point Pro".
Floor distribution of the radio signal
■
Power supply via PoE or separate power supply adapter.
■
[3] „RF Repeater"
The "RF Repeater" increases the radio range of the "Smart Access Point Pro" or a "RF/IP
Gateway" to the "Electronic cylindrical lock". Up to 3 "RF Repeater" can be switched in
sequence in one line on a "Smart Access Point Pro" or a "RF/IP Gateway".
The radio range between the devices amounts to a maximum of 10 meters.
The "RF Repeater" has the following main functions:
Transferring the communication of up to 16 "Electronic cylindrical lock".
■
Power supply via a separate power supply adapter.
■
[4] Transponder keys
The "Electronic cylindrical lock" are operated with the transponder keys.
The transponder keys are ordered separately.
The transponder keys are preconfigured and ready for operation.
The transponder keys are personalized in the management software of the "Smart Access Point
Pro" in three steps:
– A user is created in the management software of the "Smart Access Point Pro".
– The user is assigned a transponder key, which he is permitted to use.
– The user is assigned the "Electronic cylindrical lock", which he is permitted to open.
A user is then permitted or not permitted to open a door via the communication of the
"Electronic cylindrical lock" with the management software of the "Smart Access Point Pro".
[5] Maintenance card
The reading heads of the "Electronic cylindrical lock" are put into operation with the
maintenance card.
– For commissioning, a radio connection must be established between the reading head of a
"Electronic cylindrical lock" and the "Smart Access Point Pro".
A maintenance card is ordered separately.
Maintenance card is preconfigured and ready for operation. There is no personalization. A
maintenance card can be used in every "ABB-AccessControl" system.
System Manual 2CKA001473B5074
Overview of product range
│21