Table of Contents
Advertisement
Fig. 79:
Selecting the building form
3. Select the suitable building form in the list [1] and pull it onto the working area [2].
Fig. 80:
Adjusting the building form
4. Click on the building.
–
The building gets a blue background. Buttons appear at the edge of the building with
which the form and size of the building can be adjusted.
–
The building is turned with button [1].
–
The position of the individual edges is changed with button [2].
–
The size of the building is enlarged or reduced with button [3].
5. Enter the name of the building in field [4].
6. Click on the "Save" button [5].
System Manual 2CKA001473B5074
Management software in the "Smart Access Point Pro"
│97
Advertisement
Table of Contents
