Fig. 43:
Inserting the batteries
4. Inserting the batteries of the "Electronic cylindrical lock".
click!
1
2
Fig. 44:
Mounting the head housing
5. Remount the head housing of the reading head.
–
Ensure that the contact protection remains within the head housing and does not buckle
during mounting.
Fig. 45:
Maintenance card
6. Log the reading head into the "Smart Access Point Pro" with the maintenance card.
–
To log in the reading head, change into the management software of the "Smart Access
Point Pro.
–
For the necessary steps in the management software, see chapter 5.2.2 "Creating
floors" on page 99.
–
The reading head is added to the list of available devices.
7. Placing the reading head in the building structure of the "Smart Access Point Pro".
–
To place the reading head, change into the management software of the "Smart Access
Point Pro.
–
For the necessary steps in the management software, see chapter 5.4.3 "Placing the
"Electronic cylindrical lock"" on page 120.
–
If the building structure is not yet available, first create it, see chapter 5.3.2 "Add
"Electronic cylindrical lock"" on page 105.
System Manual 2CKA001473B5074
LR1
Commissioning
│53