Table of Contents
Advertisement
1.2
Target group / Qualifications of personnel
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The specialist staff should have general knowledge about networks.
1.3
Introduction to ABB-AccessControl
The "Electronic cylindrical lock" are designed and provided for application within the "ABB-
AccessControl" IP system.
Communication and current
The "Electronic cylindrical lock" communicate via radio control. A separate power supply is not
required. The "Electronic cylindrical lock" obtain the necessary power via the supplied batteries.
Scalability
Smaller objects can be installed as easily as large objects. Existing installations can be
extended at all times.
Operation
Central management of all access points via the ABB-Welcome
Loss of keys
No change of hardware when keys are lost.
New or retrofitting
The "Electronic cylindrical lock" can be installed on almost all doors. Either new or for
retrofitting.
System Manual 2CKA001473B5074
Overview
®
App app.
│6
Advertisement
Table of Contents
