Use the following steps to connect with the PC:
Fig. 20:
"Smart Access Point" in the network list of the PC
1. Connecting the PC with the WLAN of the "Smart Access Point".
–
The WLAN access data are located on the device. Remove the cover of the device.
Fig. 21:
Entering the IP address in a browser
2. Call up the start page of the "Smart Access Point" in a commercially available browser.
–
For this, enter the IP address "192.168.3.1" in the address line of the browser.
System Manual 2CKA001473B5074
Commissioning
│34