How To Install The Washer Dryer - Hitachi BD-D120XGV Instruction Manual

How to Install the Washer Dryer

The symbol M is for checking whether you install the washer dryer correctly.
●
Safety Instructions
M The washer dryer is heavy. Use caution when lifting it.
M When lifting the washer dryer, do not hold the door or adjustable leg. Lift the washer dryer with two
persons holding the bottom by one hand and the back of the washer dryer by the other hand.
M Frozen hoses may tear/burst. Do not install the washer dryer in areas where there is a risk of freezing,
or outdoors.
M If the power supply plug is damaged, in order to avoid hazard, it must only be replaced by an authorized
service agent or repair shop appointed by the manufacturer.
M Make sure to earth the unit. Failure to earth the unit may cause electric shock if an electric leak takes
place.
Dimensions
W:600 mm
Where to install the washer dryer
M Install the appliance on a flat hard floor to avoid excessive vibration and noise.
M Do not install the unit in humid places such as a bathroom or places that are exposed to wind and rain.
M Keep the minimum installation distance from the walls to prevent abnormal sound and vibration.
M For neater installation under the counter, check the height of internal measurement before fitting and
adjust to the appropriate height with the adjustable feet.
Page 14 : How to Install the Washer Dryer (Level Adjustment).
* Distance above installation under the counter case
(Sides)
At least 20 mm
10
D:650 mm
H:850 mm
At least 20 mm
Maximum door opening angle 110°
(Sides)
At least 50 mm
Make the inner
edge of the
door equal with
the edge of the
counter.
(Back)