Hitachi BD-D120XGV Instruction Manual page 15

Checking after installation
After installation is completed, perform a trial operation following the procedure below and confirm
that there is no unusual sound or water leakage and that water drains smoothly.
Trial Operation Procedure
1. Gradually turn on the tap.
You can thus prevent sudden rise in water pressure being applied to the washer dryer.
2. Press the Power On-Off button to switch power on.
3. Press and hold the Delicate program and the Spin button together at least 3 seconds.
"777" appears on the display.
4. Press the Start/Pause button to start operation.
After trial operation cycle of water supply, wash, drain, spin and dry which takes about 6 minutes in
total, starts and finishes automatically.
5. While the operation, check that there is no water leakage, no abnormal
sound and no abnormal vibration. For example, whether water can drains
smoothly or dryer sound is not abnormal.
If any abnormal sound or vibration is found, check the Service
center.
Locations to be checked in the trial operation
■
Check if there is no any water leakage at the following
locations when performing the trial operation after installation.
1
Connection between the water tap and the one-touch joint.
2 Connection between the one-touch joint and the water supply hose.
3 Connection between the water supply hose and the washer dryer.
4
Drain hose connections.
If any of the following conditions or other abnormalities occur,
immediately pull out the power plug to prevent an accident and
contact your local service center.
■
The washer dryer does not operate when you switch power on.
■
The power cord has cracks.
■
There are abnormal vibrations and sounds during operation.
■
There is a smell of burning.
Before the first wash
Select the Cotton program with water temperature at 60ºC setting and allow the unit to wash without
clothing.
This will remove residues and water that may have been left in the drum during manufacturing.
Customer Service
In case of malfunction of the washer dryer, please check these Operating & Installation instructions
carefully before you call for repair services.
If you are unable to identify or solve the problem, please contact your local service center.
Before calling, make a note of the model name, serial no. and purchase date of your washer dryer.
You can find the model name and serial no. on the label attached to the inside of filter cover.
Model Name : XX-XXXXXX
Serial No : XXXXXXXX
4
3
1
2
15