Control Panel And Display - Hitachi BD-D120XGV Instruction Manual

Control Panel and Display

NOTICE
Directly touch the buttons on the Control Panel with your bare finger.
●
If you find water drops, detergent or other foreign substances on the Door Glass, please clean them
●
up with a dry cloth.
16
1
Power On/Off button
2
Start/Pause button
3
Program button
4
Timer button
5
Prewash button
Child Lock (Hold3s)
6
Rinse Count button
Rinse Hold (Hold3s)
16
For model: BD-D120XGV/
BD-D100XGV
Press and hold this button 1 sec to switch power on and off. If no program is selected or
no button is pressed for 20 minutes, the washer dryer automatically switches itself off.
(For model : BD-D120XGV/BD-D100XGV. In the case of selecting the unit to be in
the remote status If no program is selected or no button is pressed for 23 hours, the
washer dryer automatically switches itself off.)
Press this button to start or pause a program. When the machine is paused for over
1 hour, the washer dryer automatically switches itself off.
(When the machine is paused during the drying process for over 15 minutes, the
washer dryer automatically switches itself off.)
* During the drying process, if the temperature inside the drum is high, it will not be
possible to pause.
* If the temperature inside the drum is high, a cool down process is performed to
lower the temperature inside the drum by automatically operating the fan for safety.
It cannot be paused during the cool down process.
Press this button to select the program.
Let you program a wash in advance sine 2 to 24 hours later. The
on the display.
Prewashes heavily soiled items before the main wash.
The symbol is shown on the display. Pour the powdered detergent into the
dispenser .
* This unit cannot be used Prewash program if the Auto dosing function is not
enabled. (For model BD-D120XGV/BD-D100XGV)
Child lock: To prevent accidental operation by children, this disables the operation
buttons, and also locks the door. Press the Prewash button for 3 seconds to
activate this option. The
for 3 seconds again to cancel the child lock.
Can increase and decrease the number of rinses for washing. While you press this
button, the number of rinses and the
Rinse Hold : Laundry remains in the last rinse water without progressing to the
final spin cycle to prevent the clothes from wrinkling. Press the Rinse Count button
for 3 seconds to activate this option. The
To unload, select the Spin program from the Special Program and set the spin
speed to No spin(No), the machine will only drain the water.
symbolis shown on the display. Press Prewash button
symbol is shown on the display.
symbol is shown on the display.
For model:
BD-D120XGV/
BD-D100XGV
Control Panel: BD-D120XGV
symbol is shown