Hitachi BD-D120XGV Instruction Manual page 5

Power source and cord
■
Do not insert the plug with a wet hand.
This could cause an electric shock.
■
Use the rated mains voltage and do not connect another plug at the same socket.
Using the washer dryer plug together with other electrical systems may cause overheating in the
plug and result in fire.
■
Clean off all the dust on the plug.
A dirty or dusty plug may cause a fire.
■
Do not use an electric socket or connection which is damaged or loose.
This could cause an electric shock or a short circuit which may start fire.
■
Do not mark, cut, modify, bend or fold the power cable.
A damaged power cable could cause fire or an electric shock.
■
Do not use a mains plug adaptor or an extension cable.
This could cause overheating which may cause a fire.
■
If the power supply plug is damaged, it must only be replaced by the authorized service agent or
repairing shops appointed by the manufacturer in order to avoid a hazard.
Child safety
■
Keep packaging out of reach of children and babies.
Danger of suffocation.
■
Do not let children climb onto the washer dryer or open the drum door, and do not leave a box or chair
near the washer dryer which could enable children to climb onto it.
This may cause injury.
■
Children should be supervised to ensure that they do not play with the washer dryer.
Issues which could cause injury or damage your belongings
General safety
■
If there is a water outage or you remove the water supply hose and reattach it, turn off the tap and press
the Start/Pause button, then turn on the tap slowly after 40 seconds.
Air pressure could damage the washer dryer if there is a lot of air in the water pipe.
■
Regularly check to confirm that the union nut of the water supply hose is tightened.
A loose nut may cause a water leak.
■
Remove the plug from the socket and turn off the water tap if you don't use the machine for a long time.
CAUTION
5