Steps
1. Align and insert the speaker into the slot and press it until the release tab clicks.
2. Route the speaker cable through the routing guide on the fan assembly.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Processor fan
Removing the processor fan
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the speaker.
About this task
The following image(s) indicate the location of the processor fan and provide a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
29