Installing The Internal Antenna-Location 1 - Dell Precision 3260 Compact Service Manual

2. Remove the antenna cable from the securing clip on the computer.
3. Remove the single (M3x3) screw that secures the internal antenna to the chassis.
4. Remove the antenna holder ribs from the holes on the chassis.
5. Lift the internal antenna module away from the chassis.
Installing the internal antenna—location 1
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the Internal antenna and provides a visual representation of the installation
procedure.
Steps
1. Remove the Aux antenna-cable adhesive tape.
2. Align the screw holes on the chassis with screw hole on the internal antenna module.
3. Insert the antenna holder ribs into the holes on the chassis.
66 Removing and installing components