Steps
1. Insert the coin-cell battery into the socket with the positive side (+) label facing up and snap the battery in the socket.
2. Place the computer in an upright position.
Next steps
1. Install the
optional I/O
2. Install the
riser
card.
3. Install the
side
cover.
4. Follow the procedure in
Heat sink
Removing the heat sink
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
processor
About this task
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
50
Removing and installing components
module.
after working inside your
before working inside your
fan.
computer.
computer.