3. Install the
processor
fan.
4. Install the
side
cover.
5. Follow the procedure in
Removing the M.2 2280 PCIe solid-state drive (slot-1)
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
processor
4. Remove the
riser
card—optional.
5. Remove the
hard-drive
About this task
The following image(s) indicate the location of the solid-state drive and provide a visual representation of the removal
procedure.
Steps
1. Place the computer on its side with the left side facing up.
2. Remove the screw (M2x3.5) that secures the 2280 solid-state drive to the system board.
3. Slide and lift the 2280 solid-state drive from the M.2 card slot on the system board.
36
Removing and installing components
after working inside your
before working inside your
fan.
assembly.
computer.
computer.